MS-6507 AUDIO DRIVER

Position the cooling set onto the 2. Please turn off the power and unplug the power cord before installing the CPU. You can differentiate the color of the audio jacks for different audio sound effects. You can connect a network cable to it. You may use the pin ATX power supply as you like.

Uploader: Toran
Date Added: 3 July 2018
File Size: 68.33 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 41212
Price: Free* [*Free Regsitration Required]

Any attempt to operate beyond product specifications is not recommended. Avoid clearing the CMOS while the ajdio is on; it will damage the mainboard. The plastic clip at each side of the DIMM slot will automatically close when the memory module is properly seated. Hook one end the clip to fasten the cooling set on of the clip to hook first.

MSi MS-6507E User Manual: Front Panel Audio Connector: Jaud1

The CPU can only fit in the correct orientation. Manually check if the memory module has been locked in place by the DIMM slot clips at the sides. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Make sure that you raise the lever up to a degree angle. As the CPU is likely to move while the lever is being closed, always close the lever with your f ingers press ing tightly on top of the CPU to make sure the CPU is properly and completely embedded into the socket. You can differentiate the color of the audio jacks for different audio sound effects.

  82801DB DBM USB2 DRIVER

Then push down the power supply firmly into the connector. If any of the following situations arises, get the equipment checked by service personnel: In Dual-Channel mode, make sure that audik install memory modules of the same type and density in different channel DIMM aidio.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Press down the CPU 5.

Important You can barely see the golden finger if the memory module is properly inserted in the DIMM slot. Overclocking This mainboard ms-65077 designed to support overclocking.

Always make sure the cooling fan c an work properly to protec t the CPU from overheating. JCD1 This connector is provided for external audio input.

Front Panel Audio Connector: Jaud1 – Msi MSE User Manual [Page 34]

You can connect a network cable to it. Please note that any violation of the Gold arrow correct installation procedures may cause permanent damage to your mainboard.

  HP COLOR LASERJET CP3535N DRIVER

Never pour any liquid into the opening that could damage or cause electrical shock.

Press the CPU down firmly into the socket and close the lever. Volt Notch Aurio 1. Look for the gold arrow on the CPU.

MSi MS-6507 Manuals

Fasten down the lever. Trademarks All trademarks are the properties of their respective owners. Then press down the other end of retention mechanism.

Gold arrow O 4. Keep this equipment away from humidity. Replace only with the s ame or equivalent type recommended by the manufacturer. Make sure that you apply an even layer of thermal paste or thermal tape between the CPU and the heatsink to enhance heat dissipation.

MSI MS Intel socket Motherboard AGP 3x PCI Sound USB 4x DDR Sound

To enable successful system boot-up, always insert the memory modules into the DIMM1 first. Always read the safety instructions carefully. Place the power cord such a way that people can not step on it.